Filter
Top Products
Station Apparatus
Cordless Telephone Installation
11-34 Strata CTX I&M 06/04
Step 4: Connect Telephone Cables
Your cordless telephone must be connected to a digital telephone PBX port.
³ To connect as a stand-alone telephone
³ Connect the modular jack labeled “Line In” directly
to the telephone wall jack using one of the supplied
cables (shown at right).
³ To connect to a Strata DKT
1. Unplug the cable from the DKT and plug into the
“Line In” jack of cordless telephone base unit
(shown at right).
2. Plug the additional two-foot cable into the “Line
Out” jack of the base unit and into the DKT jack
located on the bottom of the telephone.
WARNING! ³ Never install telephone wiring during a lightning storm.
³ Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
³ Use caution when installing or modifying telephone lines.