Filter
Top Products
Station Apparatus
Cordless Telephone Installation
11-38 Strata CTX I&M 06/04
Charging Unit Wall Mounting
The charging unit is also designed to be wall mounted. Before mounting your charging unit,
consider the following:
• Select a location away from electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the wall.
• Make sure the wall material is capable of supporting the weight of the charging unit.
• Use #10 screws with anchoring devices suitable for the wall material where the charging unit
will be placed.
DKT2204-CT
1. Insert two mounting screws 1-9/10 inches apart. Allow about 3/
16 of an inch between the wall and screw heads for mounting the
telephone.
2. Plug the AC adapter into the charging unit as previously
described. Wrap the AC adapter cord around the strain relief
(shown right).
3. Place the charging unit on the posts of the wall screws and
push down until it’s firmly seated (shown right).
4. Plug the AC adapter into a standard 120VAC wall outlet.
DKT2304-CT
1. Insert two mounting screws 1-1/5 inches apart. Allow
about 3/16 of an inch between the wall and screw heads for
mounting the telephone (shown right).
2. Pass the one end through the hole of the wall mount stand and
plug it into the charging unit. Wrap the AC adapter cord around
the strain relief.
3. Slide the wall mount stand into the notches on the bottom of the
charging unit.
4. Place the charging unit on the posts of the wall screws and
push down until it’s firmly seated (shown right).
5. Plug the AC adapter into a standard 120VAC wall outlet.