Toshiba CTX28 Telephone User Manual


 
Station Apparatus
Telephone Settings
Strata CTX I&M 06/04 11-19
Station Apparatus
3000-Series Telephones
DKT2000 Mode On/Off
If you have a cordless telephone (DKT2204-CT or DKT2304-CT) that is connected to a 3000-
series telephone, you must place your DKT into 2000-mode before connecting the cordless
telephone; otherwise, the 3000-series telephone will not work.
In 2000-mode:
Only 16 characters by two lines display on the LCD.
LCD Feature button does not work
Spdial button does not work
Step 1: Turn DKT2000 Mode On/Off
Important! You must change the mode on DKT3000 telephone before connecting a
DKT2204-CT or DKT2304-CT to the DKT3000.
1. On the DKT3000 telephone, press
3+6+9+Hold (simultaneously).
2. Press
#.
3. Press
FB7 (or FB13 on the DKT3014). LED On = 2000 telephone. LED Off = 3000
telephone.
4. Press
Hold.
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone to reset itself.
Step 2: Connect Cordless Telephone to DKT3000 Telephone
Redial/Feature Button Activation/Deactivation (DKT3001 only)
Your
Flex button has been set to act as a Redial button by default. However, you can reprogram
the
Flex button to work as Flexible Button, as it set in system programming. These steps enable
you to change how the button functions.
1. Press
3+6+9+Hold (simultaneously).
2. Press
0 7.
3. Press
Msg to toggle On/Off
Msg LED On: Flex button works as Feature Button
Msg LED Off: Flex button works as a Redial button.
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Note If you program the Flex button to work as Flexible Button 3, you can press
*
to redial.
Msg/Feature Button Activation/Deactivation (DKT3001 only)
Your
Msg button has been set by default to work as a Msg button; however, you can reprogram it
to work as Feature Button.
1. Press
3+6+9+Hold (simultaneously).
2. Press
0 8.
3. Press
Msg to toggle On/Off.