Filter
Top Products
Appendix 2 - 4
Appendix 2 Cable and Connector Assembly
MITSUBISHI CNC
(6) Assembling a back shell
[1] To prevent the back shell from loosening, it is recommended to coat 2 threads of the circumference of the back
shell with adhesive.
Recommended adhesive: 1401B (Three Bond Co., Ltd.)
[2] Rotate the back shell coupling of the connector and temporarily tighten the back shell.
* When tightening temporarily, match the concavity and convexity
of the plug shell with those of the back shell.
(You can confirm the correct connection of concavity and
convexity waving lightly back shell just before inserting to BS
coupling.)
(7) Tightening a back shell
Straight back shell
[1] Fix the 2 surface width of the straight back shell on the tightening guide.
[2] Set the tightening wrench adjusting to the back shell coupling.
[3] With the wrench, tighten the back shell coupling to the straight back shell.
Recommended tightening torque: 4 to 5N•m
(Note 1) When setting the work to the wrench, adjust it to the 2 surface width.
To remove, take the reverse steps.
(Note 2) Manufactured by DDK
Contact: Fujikura Ltd. http://www.fujikura.co.jp/eng/
Back shell
Back shell
Back shell coupling
Back shell coupling
Temporarily
tighten
Adhesive (to be coated to 2
threads of the circumference)
Angle back shell
Adhesive (to be coated to 2
threads of the circumference)
Insert
Back shell coupling
Insert
Temporarily tighten
Back shell coupling
Plug shell concavity
and convexity
Back shell concavity
and convexity
15
20
19
Back shell
Set
Tightening guide
Back shell
wrench
Tighten
(Back shell width)
Thickness:
10
* Referential dimensions for
back shell tightening guide
٨
Bit (357J-51344T)
Torque wrench (CL6N x 8D,Tonichi Mfg.)
* Recommended tightening guide: (357J-53234T) (Note 2)
Back shell
coupling
Back shell
wrench
Tightening
guide
Recommended jigs and tools :
Back shell wrench (357J-51333T) (Note 2)
* Recommendation:
Tightening guide
(357J-53234T)