Examples 592
SmartWare Software Configuration Guide 47 • VoIP profile configuration
G.723 6k3: rxlen=30;txlen=30;ss
Fax Transmission
Modem Transmission
Dejitter
--------
Mode: Adaptive
Max. Delay: 100ms
Max. Packet Loss: 4/1000
Shrink Speed: 1
Grow Step: 1
Grow Attenuation: 1
High Pass Filter: enabled
Post Filter: enabled
Fax
---
Detection: CED Tone
T.38 High Speed Redundant Packets: 0
T.38 Low Speed Redundant Packets: 0
Max. Bit Rate: 14400bps
Volume: -9.500dB
Error Correction: enabled
HDLC: enabled
Dejitter Max Delay: 200ms
Modem
-----
Max. Bit Rate: 14400
Volume: -9.500dB
HDLC: enabled
DTMF
----
Relay: enabled
Mute Encoder: enabled
RTP
---
Payload Type NTE: 101
Description:
3. Create VoIP profile and give it a name. All settings have default values
4., 5. Remove the default codecs G.711alaw and G.711uLaw
6. Add codec g723-6k3 with silence-suppression enabled
7. Allow the dejitter buffer to compensate 100 milliseconds of network jitter.