Filter
Top Products
Call router configuration task list 463
SmartWare Software Configuration Guide 40 • Call router configuration
Example: Configure address completion timeout
node[switch]#digit-collection timeout 3
node[switch]#digit-collection terminating-char *
Configures the digit collection timeout to 3s. The digit-collection timeout can be stopped by the user entering
the asterisk (*) character.
Configure number prefix for ISDN number types
The called and calling party numbers in an ISDN signaling message are of a defined number type; national,
international or unknown. Depending on where the message originates (PSTN, mobile network, PBX) this
number type may differ. Table 16 illustrates the three number types.
The missing prefix in the national and international number types can complicate the call router configuration,
so SmartWare offers the possibility to expand these numbers before entering the first call router table.
Note The configured prefix is not removed at the exit of the call router (i.e. when
a destination interface is found), but the number has the number type
unknown.
Procedure: To configure number prefix
Mode: Context CS
Example: Configure number prefix
node[switch]#national-prefix 0041
Input: 99888xxxx Result: 004199888xxxx
node[switch]#international-prefix 00
Input: 4199888xxxx Result: 004199888xxxx
Table 16. ISDN number types
Type Format Description Example
unknown as dialed with all leading zeros or other prefix numbers 0041 99 888xxxx
national (area code) (local extension number) 99 888xxxx
international (country code) (area code) (local extension number) 41 99 888xxxx
Step Command Purpose
1
node(ctx-cs)[switch]#
national-prefix prefix
Adds prefix to all E.164 numbers of type national
before entering the call router.
2
node(ctx-cs)[switch]#
international-prefix prefix
Adds prefix to all E.164 numbers of type interna-
tional before entering the call router.