Patton electronic SmartNode 4110 Series IP Phone User Manual


 
Sample configurations 378
SmartWare Software Configuration Guide 32 • VPN configuration
Cisco router configuration
crypto ipsec transform-set DES esp-des
!
crypto map VPN_DES local-address FastEthernet0/1
crypto map VPN_DES 10 ipsec-manual
set peer 200.200.200.2
set session-key inbound esp 2222 cipher FEDCBA0987654321
set session-key outbound esp 1111 cipher 1234567890ABCDEF
set transform-set DES
match address 110
!
access-list 110 permit ip 172.16.0.0 0.0.255.255 192.168.1.0 0.0.0.255
!
interface FastEthernet0/0
ip address 172.16.1.1 255.255.0.0
!
interface FastEthernet0/1
ip address 200.200.200.1 255.255.255.252
crypto map VPN_DES
!
ip route 192.168.1.0 255.255.255.0 FastEthernet0/1
IPsec tunnel, AES encryption at 256 bit key length, AH authentication with HMAC-
SHA1-96
SmartNode configuration
profile ipsec-transform AES_SHA1
esp-encryption aes-cbc 256
ah-authentication hmac-sha1-96
profile ipsec-policy-manual VPN_AES_SHA1
use profile ipsec-transform AES_SHA1
session-key inbound ah-authentication 1234567890ABCDEF1234567890ABCDEF12345678
session-key outbound ah-authentication FEDCBA0987654321FEDCBA0987654321FEDCBA09
session-key inbound esp-encryption
1234567890ABCDEF1234567890ABCDEF1234567890ABCDEF1234567890ABCDEF
session-key outbound esp-encryption
FEDCBA0987654321FEDCBA0987654321FEDCBA0987654321FEDCBA0987654321
spi inbound ah 3333
spi outbound ah 4444
spi inbound esp 5555
spi outbound esp 6666
peer 200.200.200.1
mode tunnel
...
Rest of the configuration, see above, just change the name of the IPsec policy pro-
file in the ACL profile ‘VPN_Out’
Cisco router configuration
crypto ipsec transform-set AES_SHA1 ah-sha-hmac esp-aes 256
!
crypto map VPN_AES_SHA1 local-address FastEthernet0/1
crypto map VPN_AES_SHA1 10 ipsec-manual
set peer 200.200.200.2