Filter
Top Products
Setting basic system information 271
SmartWare Software Configuration Guide 25 • SNMP configuration
Mode: Administrator execution
If any of the command options name, location, or hostname has to be formed out of more than one word, the
information is put in “double quotes”.
Note Enter an empty string “” to get rid of any of the system settings.
The MIB-II system group values are accessible for reading and writing via the following SNMP objects:
• .iso.org.dod.internet.mgmt.mib-2.system.sysContact
• .iso.org.dod.internet.mgmt.mib-2.system.sysName
• .iso.org.dod.internet.mgmt.mib-2.system.sysLocation
After setting these values according to 1 through 3 any SNMP MIB browser application should read the values
using a
get or get-next command as shown in figure 40.
The procedure to use the SNMP MIB browser is:
• Enter the community string public into the Community field in the upper right corner of the window. For
safety reasons each entered character is displayed with a “*”.
• Access any of the supported MIB system group object by using the GetNext button from the button bar of
the window.
Step Command Purpose
1 node(cfg)#system contact name Sets the contact persons name
2 node(cfg)#system location location Sets the system location
3 node(cfg)#system hostname hostname Sets the system hostname and command line prompt