Filter
Top Products
Activating CS context configuration 350
SmartWare Software Configuration Guide 31 • CS context overview
Mode: Context CS
Example: Enable CS Context
The following example shows how to enable the call router debug monitor and how to enable the CS context.
It also shows the output from the call router debug monitor.
node(cfg)#show call-router config detail 5
Table switch/TAB-ISDN-SERVICE:
Key Value Function Dest-Type Dest-Name
itc -
-------------------------------------------------------------------------------
unrestricted-digital - - dest-interface IF-LOCAL-BA
default - - dest-table TAB-DEST-A
Table switch/TAB-DEST-A:
Key Value Function Dest-Type Dest-Name
called-e164 -
-------------------------------------------------------------------------------
0 - MAP-CAC-ORANGE dest-interface IF-LOCAL-BA
00 - MAP-CLI-MELON dest-interface IF-NODE-C
07[4-6] - MAP-CAC-APPLE dest-interface IF-LOCAL-BA
0336652... - - dest-interface IF-NODE-B
default - - dest-interface IF-LOCAL-BA
Table switch/CAC-APPLE:
Key Value Function Dest-Type Dest-Name
called-e164 called-e164
-------------------------------------------------------------------------------
(.%) 1055\1 - - -
...
node(cfg)#debug call-router
node(cfg)#context cs
node(ctx-cs)[switch]#no shutdown
Step Command Purpose
1 node(ctx-cs)[switch]#show call-router config detail
level
Show the CS context configuration.
Level could be 1..5. Level 1 shows less,
level 5 shows all information.
2 node (ctx-cs)[switch]#debug call-router detail level Enable the call-router debug monitor.
Level could be 1..5. Level 1 only logs
errors, level 5 shows all relevant infor-
mation to track calls through routing
tables.
3 node (ctx-cs)[switch]#no shutdown Enable the CS context, checks the inter-
face and call router configuration
4 node(ctx-cs)[switch]#show call-router status detail
level
Show the actual state of the call router.
This includes all configured tables as
they were read-in from the configura-
tion.