Patton electronic SmartNode 4110 Series IP Phone User Manual


 
Call router configuration task list 503
SmartWare Software Configuration Guide 40 • Call router configuration
Service or
Option Not
Available
(Cont.)
bearer-capability-not-
available
Drop original call The network normally provides the
requested bearer capability, but it is
unavailable at the present time. This can
be due to a temporary network problem
or subscription problem.
service-or-option-not-
available
Drop original call The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Service or
Option Not
Implemented
bearer-capability-not-
implemented
Drop original call The network cannot provide the bearer
capability requested by the user.
channel-type-not-imple-
mented
Drop original call The network or the destination equipment
does not support the requested channel
type.
facility-not-implemented
Drop original call The remote equipment does not support
the requested supplementary service.
only-restricted-digital-
available
Drop original call The network cannot provide unrestricted
digital information bearer capability. This
cause indicates that a device has
requested an unrestricted bearer service
but the equipment sending this cause only
supports the restricted version of the
requested bearer capability.
service-or-option-not-
implemented
Drop original call The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Invalid Message
invalid-call-reference Drop original call The remote equipment receives a call with
a call reference value that is not currently
in use.
channel-does-not-exist
Drop original call The receiving equipment is requested to
use a channel that is not activated on the
interface for calls. This cause indicates that
the equipment sending this cause has
received a request to use a channel not
activated on the interface for a call.
call-identity-does-not-
exist
Drop original call This cause indicates that a call resume has
been attempted with a call identity, which
differs from that in use for any presently
suspended call.
Table 21. Hunt group drop causes (Continued)
Class Cause
Default Behavior
of the Hunt
Group Service
Description