Filter
Top Products
PPP configuration task list 328
SmartWare Software Configuration Guide 30 • PPP configuration
Example: Display PPP network protocol information
node(session)[green]#show ppp networks 4
PPP Network Information:
========================
Network:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green/net
State: up
IPCP:
ID: 0
Name: ethernet 0 0 0/pppoe/ppp_green/net
State: Opened
Conf-Req send rate: 3000ms
Max. unanswered Conf-Req: 10
Local configured options:
IP Address = 172.16.40.98
IP Compression Protocol = VJC (Max-Slot-Id=31, Comp-Slot-Id=1)
Local acknowledged options:
IP Address = 10.10.10.2
IP Compression Protocol = VJC (Max-Slot-Id=31, Comp-Slot-Id=1)
Remote configured options:
IP Address = 0.0.0.0
IP Compression Protocol = VJC (Max-Slot-Id=24, Comp-Slot-Id=1)
Remote acknowledged options:
IP Address = 10.10.10.1
IP Compression Protocol = VJC (Max-Slot-Id=15, Comp-Slot-Id=1)
Remote denied options:
Remote rejected options:
Example: Display PPPoE information
node(session)[green]#show pppoe 4
PPPoE Information:
==================
Instance:
ID: 0
Name: ethernet 0 0 0/pppoe
Initiation Send Interval 3000 ms
Request Send Interval 1000 ms
Max. Initiations 20
Max. Requests 3
Received Octets 7247
Received Packets 181
Received Discards 0
Received Errors 2
Received Unknown Protos 0
Transmitted Octets 2952
Transmitted Packets 152
Transmitted Discards 1
Transmitted Errors 0
Session:
ID: 1
Name: green