Filter
Top Products
Storing call logs with quality information 113
SmartWare Software Configuration Guide 8 • RADIUS Client Configuration
Storing call logs with quality information
It is possible to store call logs with quality information in the local aaa data sink. To do so, a service aaa is
needed where the calls are routed through. Create a profile aaa with the method local. Then create a service aaa
to route the calls through.
Example:
profile aaa default
method 1 local
context cs switch
routing-table called-e164 TAB_OUT
route 200 dest-interface IF_SIP
interface isdn IF_BRI_00
route call dest-service QoS_LOG.OUT.bri
interface sip IF_SIP
bind context sip-gateway sip
route call dest-service QoS_LOG.OUT.ethernet
service aaa QoS_LOG.OUT
accounting use profile aaa LOCAL_AAA
port bri
route call dest-table TAB_OUT
port ethernet
route call dest-interface IF_BRI_00
To see the collected logs use the command show accounting or use the Web-GUI to see the logs. In the Web-
GUI, go to the 'Reports' page and select “Call Quality Log” in the tab bar on top of the page. On that page,
ou will also have the option to export the log as a comma separated text file.