Support User Manuals

Patton electronic SmartNode 4110 Series IP Phone User Manual

Open as PDF

of 664

Activating CS context configuration 356

SmartWare Software Configuration Guide 31 • CS context overview

node(q931)[2/2]#uni-side user

node(q931)[2/2]#encapsulation cc-isdn

node(q931)[2/2]#bind interface IF-PBX1

node(q931)[2/2]#exit

node(q921)[2/2]#exit

node(prt-bri)[2/2]#no shutdown

node(cfg)#port bri 2 1

node(prt-bri)[2/3]#q921

node(q921)[2/3]#q931

node(q921)[2/3]#protocol pp

node(q931)[2/3]#uni-side user

node(q931)[2/3]#encapsulation cc-isdn

node(q931)[2/3]#bind interface IF-PBX1

node(q931)[2/3]#exit

node(q921)[2/3]#exit

node(prt-bri)[2/3]#no shutdown

Conﬁguring an H.323 VoIP connection

Next we conﬁgure call signaling:

node(cfg)#gateway h323 h323

node(gw-h323)[h323]#no ras

node(gw-h323)[h323]#faststart

node(gw-h323)[h323]#bind interface eth0

node(gw-h323)[h323]#exit

node(cfg)#

Activating the CS context conﬁguration

Prior to activating our conﬁguration we use two

show commands to display part of our conﬁguration:

node(cfg)#show call-router config detail 5

Table switch/IF-PBX1-precall-service:

Key Value Function Dest-Type Dest-Name

- -

-------------------------------------------------------------------------------

- - - dest-table TAB-CALLED-NUMBER

Table switch/IF-PBX2-precall-service:

Key Value Function Dest-Type Dest-Name

- -

-------------------------------------------------------------------------------

- - - dest-table TAB-CALLED-NUMBER

Table switch/IF-PUBLIC-PSTN1-precall-service:

Key Value Function Dest-Type Dest-Name

- -

-------------------------------------------------------------------------------

- - - dest-table TAB-CALLED-NUMBER

Table switch/IF-PUBLIC-PSTN2-precall-service:

Key Value Function Dest-Type Dest-Name

- -

-------------------------------------------------------------------------------

- - - dest-table TAB-CALLED-NUMBER

previous next