Filter
Top Products
SNTP client configuration task list 289
SmartWare Software Configuration Guide 26 • SNTP client configuration
Example: Disabling the SNTP client root delay compensation
node(cfg)#no sntp-client root-delay-compensation
Showing SNTP client related information
During set-up and operation of the SNTP client, displaying the information and status of the SNTP client is
very useful.
This procedure describes how to display information and status of the SNTP client
Mode: Configure
Example: Showing SNTP client related information
node(cfg)#show sntp-client
-------------------------------------------
SNTP client enabled
Operating mode unicast
Local port 123
Primary server 172.16.1.10:123 v4
Secondary server 128.138.140.44:123 v4
Anycast address 224.0.1.1:123
Poll interval 30sec
Local clock offset disabled
GMT offset +2:00:00
-------------------------------------------
Debugging SNTP client operation
During setup and operation, debugging the behavior of the SNTP client is very useful.
Note The debug sntp client is only available in superuser mode.
This procedure describes how to enable or disable debugging
Mode: Configure
Step Command Purpose
1 node(cfg)#show sntp-client Displays information and status of the SNTP client
Step Command Purpose
1 node(cfg)#debug sntp client Enables and disables SNTP debug monitor. Using the no com-
mand syntax disables this feature.