Filter
Top Products
VoIP profile configuration task list 577
SmartWare Software Configuration Guide 47 • VoIP profile configuration
Mode: Profile VoIP
Procedure: Remove a codec from the list
Mode: Profile VoIP
Procedure: Insert a codec at a specific position in the list
Step Command Purpose
1 node(pf-voip)[name]#codec g729 tx-
length 30 rx-length 30 silence-
suppression
Appends codec g729 to the list of codecs. Speci-
fies the payload duration for transmitted RTP pack-
ets of this codec, and the maximum supported
payload duration for received RTP packets of this
codec. Allows silence suppression to be used with
this codec.
If the codec g729 already existed in the list, its
parameters are updated with the entered values.
The following codecs are available:
• g711alaw64k
• g711ulaw64k
• g723-5k3
• g723-6k3
• g726-16k
• g726-16k-cisco
a
• g726-24k
• g726-24k-cisco
• g726-32k
• g726-32k-cisco
• g726-40k
• g727-16k
• g727-24k
• g727-32k
• g729
• netcoder-6k4
• netcoder-9k6
• transparent
• transparent-cisco
a. Cisco does not use the standard ITU G.726 version of G.726, but the ATM AAL2 version. This build series now supports both versions of these codecs. The Cisco
G.726 codecs are available in profile voip as separate codecs with their name ending in -cisco.
Step Command Purpose
1 node(pf-voip)[name]#no codec g729 Remove codec g729 from the list of codecs.