Filter
Top Products
32
SmartWare Software Configuration Guide About this guide
• Chapter 19, "ISDN configuration" on page 217 describes the configuration of the Q.921 and Q.931 proto-
col and how to bind the ISDN protocol to an application.
• Chapter 20, "RBS configuration" on page 225 describes the configuration of the Robbed Bit Signaling
(RBS) protocol and how to bind it to the Call Control application.
• Chapter 37, "RBS interface configuration" on page 426 provides an overview of RBS interfaces, and the
tasks involved in their configuration.
• Chapter 21, "DSL Port Configuration" on page 230 provides an overview of the the DSL ports (ADSL and
G.SHDSL), their characteristics and the tasks involved in the configuration.
• Chapter 22, "Basic IP routing configuration" on page 235 provides an overview of IP routing and describes
the tasks involved in configuring static IP routing in SmartWare.
• Chapter 23, "RIP configuration" on page 242 provides an overview of the routing information protocol
(RIP) and describes the tasks involved in configuring RIP features within SmartWare.
• Chapter 24, "Access control list configuration" on page 253 provides an overview of IP access control lists
and describes the tasks involved in their configuration through SmartWare.
• Chapter 25, "SNMP configuration" on page 267 on page 238 provides overview information about the
simple network management protocol (SNMP) and describes the tasks used to configure those of its features
supported by SmartWare.
• Chapter 26, "SNTP client configuration" on page 282 describes how to configure a simple network time pro-
tocol (SNTP) client.
• Chapter 27, "DHCP configuration" on page 292 provides an overview of the dynamic host configuration
control protocol (DHCP) and describes the tasks involved in its configuration.
• Chapter 28, "DNS configuration" on page 304 describes how to configure the domain name system
(DNS) component.
• Chapter 29, "DynDNS configuration" on page 308 describes configuring the dynamic DNS
(DynDNS) service.
• Chapter 30, "PPP configuration" on page 313 describes how to configure the point-to-point protocol over
different link layers.
• Chapter 31, "CS context overview" on page 339 gives an overview of SmartWare circuit-switching (CS) con-
text and its associated components and describes the tasks involved in its configuration.
• Chapter 32, "VPN configuration" on page 362 describes how to configure the VPN connections between
two SmartNodes or between a SmartNode and a third-party device.
• Chapter 33, "CS interface configuration" on page 381 gives an overview of interfaces in the CS context and
describes the tasks involved its configuration.
• Chapter 34, "ISDN interface configuration" on page 390 provides an overview of ISDN interfaces, and the
tasks involved in their configuration.
• Chapter 35, "FXS interface configuration" on page 404 provides an overview of FXS interfaces, and the
tasks involved their configuration.