Filter
Top Products
Call router configuration task list 483
SmartWare Software Configuration Guide 40 • Call router configuration
Besides the header (name, input and output-type) a mapping table contains multiple entries. Each entry speci-
fies a specific value of the routing table input-type and a value that shall be applied to the call property specified
with the output-type of the table. When a call arrives a mapping table, the following procedure is applied:
1. Examine the call property as specified with the mapping table input-type.
2. Select the best matching entry. This means that the key of each of the entries is compared to the call prop-
erty and the entry that matches best is chosen.
3. Execute the entry. This means replacing the property specified with the output-type of the mapping table
with the value of the selected entry.
called-name Selects an entry based on the display name
of the called party.
Sets the display name of the called
party.
calling-name Selects an entry based on the display name
of the calling party.
Sets the display name of the calling
party.
name If the output-type is also a generic kind of
property, this mapping table is applied to
both, this calling-name and the called-
name.
If the input-type is also a generic kind of
property, this mapping table is applied
to both, the calling-name and the called-
name property.
called-ip Selects an entry based on the remote sig-
naling IP address of the destination VoIP
peer.
Sets the remote IP address of the destina-
tion VoIP peer.
calling-ip Selects an entry based on the remote sig-
naling IP address of the origination VoIP
peer.
Sets the remote IP address of the origina-
tion VoIP peer.
ip If the output-type is also a generic kind of
property, this mapping table is applied to
both, this calling-ip and the called-ip.
If the input-type is also a generic kind of
property, this mapping table is applied
to both, the calling-ip and the called-ip
property.
calling-pi Selects an entry based on the presentation
indicator.
Sets the presentation indicator.
calling-si Selects an entry based on the screening
indicator.
Sets the screening indicator.
itc Selects an entry based on the information
transfer capability (bearer capability) to
distinguish speech from data calls.
Sets the information transfer capability.
time Route calls based on the current time of
day.
Cannot be set.
date Route calls based on the current date. Cannot be set.
day-of-week Route calls based on the current day of
week.
Cannot be set.
Table 20. Mapping table types (Continued)
Type Description Input-Type Description Output-Type