Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-401UDP (Uniform Dial Plan) Routing
4
UDP (Uniform Dial Plan) Routing 4
This section includes programming procedures for assigning Uniform Dial Plan
(UDP) routing, available for Hybrid/PBX mode in Release 6.0 and later systems
only.
UDP routing is very similar to ARS, except that it is slightly simpler. UDP routing
allows system users to reach non-local extensions at a remote DEFINITY or
MERLIN LEGEND Communications System that is networked to your system.
Users simply dial the non-local extension number as they would an inside
extension number. Then UDP routing associates the dialed extension number
with one of up to 20 programmed patterns. For each pattern you can specify up to
four routes. For each route, you specify a pool dial-out code. Then you can
program Facility Restriction Levels (FRLs), absorbed digits, added digits, and
voice and/or data capability.
NOTE:NOTE:NOTE:
Before assigning routes, patterns must be assigned to non-local
extensions, which is part of the numbering of the extensions. To perform
this procedure, see “Non-Local Dial Plan Extension Ranges” on page 3–19.
This section contains programming procedures for the following UDP Routing
features:
■ UDP Pool Routing
■ Facility Restriction Level (FRL)
■ Digit Absorption
■ Other Digits
■ Voice and/or Data Routing
!
SECURITY ALERT:
Do not include the ARS codes of non-local systems in the non-local dial
plan, or calling restrictions may be violated.