Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Basics
Page 1-62Product Enhancements
1
Pool Dial-Out Code Restriction by Default 1
The default setting for the Pool Dial-Out Code restriction has changed to
restricted. No extension or remote access user with a barrier code has access to
pools until the restriction is removed by the system manager.
Outward Restrictions for VMI Ports by Default 1
Ports assigned for use by voice messaging systems (generic or integrated VMI
ports) are now assigned outward restrictions by default. If a voice messaging
system should be allowed to call out (for example, to send calls to a user’s home
office), the system manager must remove these restrictions.
!
SECURITY ALERT:
Before removing restrictions, it is strongly recommended that you read
“Appendix A: Customer Support Information.”
Default Facility Restriction Level (FRL) for VMI ports 1
The default FRL for VMI ports has changed to 0, restricting all outcalling.
Default FRL for the Default Local Route Table 1
The default FRL has changed to 2 for the Default Local Route Table. Now, system
managers can easily change an extension default of 3 to 2 or lower in order to
restrict calling. No adjustment to the route FRL is required.
Maintenance Procedure Password for Testing Outgoing Trunk Problems1
A password is now required for technicians to perform trunk tests.
!
SECURITY ALERT:
The enhancements in Release 3.1 help increase the security of the MERLIN
LEGEND Communications System. To fully utilize these security
enhancements, be sure to read and understand the information in these
upgrade notes.