Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-149DID Trunks
4
Console Display/Instructions Additional Information PC
Save your entry.
Select
.
Specify immediate-start or wink-start.
Continue to specify trunk type for the other trunk block or go to Step 8.
Select
.
Return to Step 6. The next trunk is
displayed on Line 1.
Save your entry.
Select
.
Return to the System Programming menu.
Select
twice.
Disconnect Time 4
Use this procedure to specify the DID trunk disconnect time limit in milliseconds.
Summary: Disconnect Time 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3d, Incoming Trunks: DID
Factory Setting 500 ms
Valid Entries 10 to 2,400 ms, in increments of 10 ms
x
= block number entered in Step 4
Select or
.