Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-38Using SPM
2
Use the arrow keys to highlight the name of the backup file to be converted and
press .
■ If the backup file you select is a 6.0 backup, it cannot be converted. The
following message appears:
Press to select another filename, or press to abort the convert
procedure.
■ If the backup file you select can be converted, go to Step 6.
Observe the updated file selection screen and press .
If converting from Release 1.0 or 1.1, select the CONVERT TO release. Then
press .
To convert from a later release, go to Step 7.
The screen below appears when converting from Release 1.0 or 1.1.
Follow the instructions for a floppy or a hard disk.
■ If the CONVERT TO file will be saved to a floppy disk, go to Step 8.
■ If the CONVERT TO file will be saved to the hard disk, go to Step 9.
FILENAME.XXX
=the backup filename
selected in Step 4
,
N
= drive
.
.
All characters must be entered as they
appear on the screen, including the
.
decimal point.