Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-70Lines and Trunks
4
Console/Display Instructions Additional Information PC
Enter the slot number of the module to contain the secondary
system clock.
Save your entry.
Select
.
Specify whether the clock is to be synchronized to an outside
endpoint (loop) or is to be free running (local), then go to Step 15.
Select the 800 NI-BRI module port to be the secondary clock source.
Save your entry.
Select
.
Dial or type [xx].
If the slot selected in Step 11 contains a
100D module, continue with Step 13.
If the slot selected in Step 11 contains an
800 NI-BRI, go to Step 14.
xx
= slot number entered in Step x
Select or
.
Dial or type [
x
].