Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-45Using SPM
2
Type the IS II/III password and press .
Type
ams
for the terminal emulation type and press .
■ If you are working with IS II, the IS II main menu appears.
■ If you are working with IS III, the system prompts you for your login
registration. After you enter your login and press , the IS III main
menu appears.
To exit from IS II/III programming, press (
).
The system prompts you for confirmation that you want to exit. After confirmation the
following message appears.
Password 2
The Password option is used by qualified service personnel to change the modem
connection password. A password is always required to establish a connection
with the built-in modem. The password always consists of seven characters. You
can perform remote system programming only if you enter the password correctly.
A default password is set at the factory. You must obtain this password from your
system consultant (SC).
Follow the steps below to change the modem connection password.