Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-91DS1 Facilities
4
To select T1- All Tie:
→ →Type slot no.→ → → → → , ,
or → → → → →
To select T1- Tie:
→ →Type slot no.→ → → → → , ,
or → →Type channel no.→ → → → →
To select T1: ALL Switched 56 Data:
→ →Type slot no.→ → → → → →
→ →Select , , , , , , or
→Program options→ → → → →
To select T1: Switched 56 Data:
→ →Type slot no.→ → → → → →
→ →Type channel no.→ →Select , , ,
, , , or
→Program options→ → → →
→
Table 4–1. Switched 56 Data Signaling Options
Procedure: Type of DS1 Facility 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.
Option Factory Setting Range
Direction Two-Way Two-Way, Outgoing, Incoming
Intype Wink-Route by Dial Plan Wink-Route by Dial Plan,
Delay-Route by Dial Plan
Auto-Route by Line Appearance
Outtype Wink Wink, Delay, Auto
Answer Supervision 300 ms 200-4,800 ms (increments of 20 ms)
Disconnect 300 ms 200-4,800 ms (increments of 20 ms)
Inmode Touch Tone Touch Tone, Rotary
Outmode Touch Tone Touch Tone, Rotary