Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-311Optional Group Calling Features
4
Summary: Group Calling Overflow and
Thresholds 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Overflow coverage: none
Threshold: 1 call
Timeout: 0 sec
Prompt-based overflow: Disabled
Valid Entries Overflow coverage: Backup extension number
Threshold: 1 to 99 calls
Timeout: 0 to 900 seconds
Prompt-based overflow: Enabled, Disabled
Inspect No
Copy Option No
Console Procedure
→More→ → →
Dial calling group ext. no.→ →Dial overflow ext. no.→
→ →Drop→Dial no. of
calls
→ → →Drop→
Dial no. of seconds→ → →
or → → → →
PC Procedure → → → →Type calling group ext. no.→
→Type overflow ext. no.→ → →
+
→Type
no. of calls
→ → →
+
→Type no. of seconds→
→ → or → → → →
Group Calling Message-Waiting Indicator 4
Use this procedure to designate the extension to receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same message-
waiting receiver. The extension assigned as a message-waiting receiver does not
have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.