Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-156Optional Group Calling Features
3
Optional Group Calling Features 3
This section includes programming procedures for the following optional group
calling features:
■ Hunt Type
■ Group Calling Delay Announcements
■ Group Calling Announcement Interval
■ Group Calling Repeat Announcement
■ Group Coverage Receiver
■ Group Calling Overflow and Thresholds
■ Group Calling Message-Waiting Indicator
■ Group Calling Calls-in-Queue Alarm Thresholds
■ Group Calling External Alert for Calls-in-Queue Alarm
■ Group Type
■ Queue Control (Release 6.0 and later systems only)
Hunt Type 3
Use this procedure to assign one of the following hunt-type patterns to calling
groups:
■ Circular Hunting Pattern. The system distributes calls to group members
by hunting in a circular pattern for the first available extension after the one
that received the last call to the group.
■ Linear Hunting Pattern. The system searches for an available group
member in the order in which the extensions were assigned to the calling
group.
■ Most Idle Hunting Pattern. The system searches for the available
member that is “most idle.” This distribution scheme can be more equitable
than the circular hunting pattern.
Summary: Hunt Type 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Circular hunting pattern