Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-9Basic System Operating Conditions
3
Console Display/Instructions Additional Information PC
Enter six digits for the current date.
Dial or type [
mmddyy
].
Save your entry.
Select
.
Return to the System Programming menu.
Select
Set System Time 3
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports.
NOTES:
1. If you are planning to use the SMDR feature, make sure the system time
is set accurately. If you change the system time while the system is in
Night Service mode, Night Service is deactivated and must be manually
reactivated. If you have installed applications such as Call Management
System (CMS) or AUDIX Voice Power, you may need to set the time in
the applications software whenever you reset the system time.
2. In Release 6.0 and later systems, where a MERLIN LEGEND
Communications System is networked in a private network with one or
more other MERLIN LEGEND Communications Systems or with one or
more DEFINITY Communications Systems, SMDR reports may report
outgoing calls using more than one call record (especially for tandem
calls), depending upon how SMDR is programmed and how calls are
routed. Therefore, ensure that the system date and time are set
accurately on each system that carries these calls. When you examine
records for network calls, you may need to be aware of time zone
differences among different system locations.
Summary: Set System Time 3
Programmable by System Manager
Mode All
Idle Condition Not Required
Planning Form Form 1, System Planning
Factory Setting 0000