Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Special Characters
Page H-4MLX Display Telephones
H
MLX Display Telephones 8
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character in a dialing sequence after a dial-out code to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H–4. Special Characters for MLX Display Telephones
Press ... See ... Means ...
Drop
Stop. Halts the dialing sequence to allow for system
response.
Hold
Pause. Inserts a 1.5-second pause in the dialing sequence.
Multiple consecutive pauses are allowed.
Conf
Flash. Sends a switchhook flash. Must be the first entry in the
dialing sequence.
#
End of Dialing for extension programming only. Used at
the end of a dialing sequence to indicate that the user has
finished dialing or to separate one group of dialed digits from
another.
##
End of Dialing. Used to signal the end of the dialing
sequence or to separate one group of dialed digits from
another.