Lucent Technologies 6.0 Telephone User Manual


  Open as PDF
of 1114
 
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-77Extensions
3
Release 3.0 and later
Each System Access Ring or Voice on an individual telephone can be
assigned as a Shared System Access (SSA) button on up to 27 other
telephones.
System Access and Intercom buttons are centrally programmed and cannot
be programmed by individual telephone users.
Summary: Assign Intercom or System Access
Buttons 3
Programmable by System Manager
Mode All, but note differences in factory settings.
Idle Condition Telephone idle
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjuncts: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct (DLC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Key Mode. An Intercom Ring (ICOM Ring), an Intercom
Voice (ICOM Voice), and the first eight lines connected to the
system are assigned to all analog multiline and MLX
telephones, excluding operator positions. Two Intercom Ring
buttons are assigned to tip/ring equipment connected on an
012 or 016 module. An Intercom Ring and an Intercom
Originate Only (ICOM Orig Only) button are assigned to
tip/ring equipment connected by an MFM. No outside lines
are assigned.
Behind Switch Mode. An Intercom Ring, an Intercom Voice,
and a prime line button are assigned to all analog multiline
and MLX telephones, excluding operator positions. Two
Intercom Ring buttons and a prime line button are assigned
to tip/ring equipment connected to an 012 module. An
Intercom Ring and an Intercom Originate Only Ring button
are assigned to tip/ring equipment connected by an MFM. No
outside lines are assigned.
Hybrid/PBX Mode. System Access Ring (SA Ring), System
Access Voice (SA Voice), and System Access Originate Only
Ring (SA Orig Only) buttons are assigned to all analog
multiline and MLX telephones, excluding operator positions.