Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-81Lines and Trunks
4
Console/Display Instructions Additional Information PC
Enter the first trunk number to copy to.
Save your entry.
Select
.
If you get the Station Busy message, wait for an
idle condition or exit system programming and try
again later.
Enter the last trunk number in the block to copy to.
Save your entry.
Select
.
Return to the System Programming menu.
Select
three times.
xxx
= “copy from” trunk entered in Step 1
Dial or type:
Trunk number [
nnn
]
Slot and port number [
sspp
]
Logical ID number #[
nnn
]
xxx
= “start copy to” trunk entered
in Step 3
Dial or type:
Trunk number [
nnn
]
Slot and port number [
sspp
]
Logical ID number [
nnn
]