Lucent Technologies 6.0 Telephone User Manual


  Open as PDF
of 1114
 
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-280Optional Extension Features
4
Summary: Calling Restrictions 4
Programmable by System Manager
Mode All
Idle Condition Extension idle
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Unrestricted
Valid Entries Unrestricted, Outward restricted, Toll restricted
Inspect No
Copy Option Yes
Console Procedure
Dial ext. no. Select
restriction
PC Procedure Type ext. no. Select restriction
Copy Calling Restrictions 4
Use this procedure to copy calling restrictions, Allowed lists, and Disallowed lists.
Feature assignment must be completed for the “copy from” extension. These
features can then be copied to an individual extension or block of extensions with
identical calling restriction requirements.
If you are copying restrictions to a block of extensions and one of the extensions
in the block is in use, the display shows the
message.
Copying for the rest of the extensions in the block is delayed until the busy
extension becomes idle. The number of the busy extension is not shown. If a DSS
is attached, the LED associated with the busy extension is on. If you exit instead
of waiting for the busy extension to become idle, copying for the rest of the
extensions in the block is canceled; however, the restrictions that have already
been copied are not canceled.
If you are copying restrictions to a block of extensions, they must be sequentially
numbered.