Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-110DS1 Facilities
4
Frame Format 4
Use this procedure to specify the framing format for the 100D module as
D4-compatible or Extended Superframe. Your selection must match the framing
mode at the far end of the DS1 facility.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, use the Extended Superframe format for
tandem PRI trunks.
Summary: Frame Format 4
Programmable by System Manager
Mode All
Idle Condition 100D module idle
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting D4 compatible
Valid Entries D4, ESF
Inspect No
Copy Option No
Console Procedure
→ →Dial slot no.→ →
→Select format type→ → →
PC Procedure → →Type slot no.→ → →Select format
type
→ → →
Procedure: Frame Format 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.