Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-267Extensions
4
In addition, this procedure can be used to specify the number of rings before a call
transferred by the voice messaging system is sent to the backup position for both
integrated and generic VMI ports. The number of rings cannot be programmed for
individual voice messaging systems; the single setting applies for all. Use the
Group Type procedure in “Optional Group Features” to assign VMI ports as either
integrated or generic.
!
SECURITY ALERT:
See “Security Risks Associated with the Automated Attendant Feature of
Voice Messaging Systems” on page A–14 and “Security Risks Associated
with Transferring through Voice Messaging Systems” on page A–12 in
Appendix A, “Customer Support Information” for details on preventing toll
fraud.
Summary: Voice Messaging System and
Automated Attendant 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form See forms packaged with application
Factory Setting Touch-tone duration: 100 ms
Interval between digits: 50 ms
Number of rings before transfer: 4
Valid Entries Touch-tone duration: 50 to 200 ms, in increments of 25 ms
Interval between digits: 50 to 200 ms, in increments of 25 ms
Number of rings before transfer: 0 to 9
Inspect No
Copy Option No
Console Procedure
→ → →Drop→Dial no. of
rings
→ → →Drop→Dial no. of ms→
→ →Drop→Dial no. of ms→
→ →
PC Procedure → → →
+
→Type no. of rings→ →
→
+
→Type no. of ms→ → →
+
→
Type no. of ms→ → →