Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-140Optional Group Features
3
3
Optional Group Features 3
The procedures in this section describe how to program the following optional
features:
■ Pickup Groups
■ Group Paging
■ Group Coverage Member Assignments
■ Group Coverage Delay Interval (Release 4.0 and earlier)
■ Group Calling Member Assignments
■ Group Calling Line/Trunk or Pool Assignments
Pickup Groups 3
Use this procedure to assign or remove an extension from a pickup group. A
pickup group consists of telephone users who can answer each others’ calls by
pressing a button or by dialing a code.
NOTES:
1. A maximum of 30 pickup groups, with a maximum of 15 extensions per
group, is allowed.
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you must remove it
from its current group.
Summary: Pickup Groups 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7a, Pickup Groups
Factory Setting Not applicable
Valid Entries Pickup group number, extension number
Inspect Yes
Copy Option No
Console Procedure
→ →Dial pickup group no.→
→Dial ext. no.→ → → →
PC Procedure → →Type pickup group no.→ →Type ext. no.→
→ →