Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-63Upgrading the System
2
■ Table 2–10. Lists the features added with Release 3.1 of the
communications system.
— When you upgrade from Release 3.0 to Release 3.1, you must
program these features as the last step of the upgrade procedure.
— When you upgrade from Release 2.0 or 2.1 to Release 3.1, you
must program the features listed in Table 2–9
, then the features
listed in Table 2–10
.
— When you upgrade from Release 1.1 to Release 3.1, you must
program the features listed in Table 2–8
, then the features listed in
Table 2–9
, then the features listed in Table 2–10.
— When you upgrade from Release 1.0 to Release 3.1, you must first
program the features listed in Table 2–7
, then the features listed in
Table 2–8
, then the features listed in Table 2–9, then the features
listed in Table 2–10
.
■ Table 2–11. Lists the features added with Release 4.0 of the
communications system.
— When you upgrade from Release 3.1 to Release 4.0, you must
program these features as the last step of the upgrade procedure.
— When you upgrade from Release 3.0 to Release 4.0, you must
program the features listed in Table 2–10
, then the features listed in
Table 2–11
.
— When you upgrade from Release 2.0 or 2.1 to Release 4.0, you
must program the features listed in Table 2–9
, then the features
listed in Table 2–10
, then the features listed in Table 2–11.
— When you upgrade from Release 1.1 to Release 4.0, you must
program the features listed in Table 2–8
, then the features listed in
Table 2–9
, then the features listed in Table 2–10, then the features
listed in Table 2–11
.
— When you upgrade from Release 1.0 to Release 4.0, you must first
program the features listed in Table 2–7
, then the features listed in
Table 2–8
, then the features listed in Table 2–9, then the features
listed in Table 2–10
, then the features listed in Table 2–11.
■ Table 2–12. Lists the features added with Release 4.1 of the
communications system.
— When you upgrade from Release 4.0 to Release 4.1, you must
program the features listed in Table 2–12
.
— When you upgrade from Release 3.1 to Release 4.1, you must
program the features listed in Table 2–11
, then the features listed in
Table 2–12
.