Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Special Characters
Page H-3MLX-10 and MLX-5 Nondisplay Telephones
H
MLX-10 and MLX-5
Nondisplay Telephones 8
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H–3.
Special Characters for MLX-10 and MLX-5
Nondisplay Telephones
Press... Means...
Drop Stop. Halts the dialing sequence to allow for system
response.
Hold Pause. Inserts a 1.5-second pause in the dialing sequence.
Multiple consecutive pauses are allowed.
Conf Flash. Sends a switchhook flash. Must be the first entry in the
dialing sequence.
#
End of Dialing for extension programming only. Used at
the end of a dialing sequence to indicate that the user has
finished dialing or to separate one group of dialed digits from
another.
##
End of Dialing. Used to signal the end of the dialing
sequence or to separate one group of dialed digits from
another.