Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-80Lines and Trunks
4
Console/Display Instructions Additional Information PC
Enter the trunk number to copy to.
Continue to copy options from this trunk or to another trunk or go to Step 5.
Select
.
Return to Step 3. The next QCC operator
is displayed on Line 1.
Save your entry.
Select
.
Return to the System Programming menu.
Select
three times.
◆ Block of Trunks Procedure
Console/Display Instructions Additional Information PC
Enter the trunk number to copy from.
Save your entry.
Select
.
If you get the Station Busy message, wait for an
idle condition or exit system programming and try
again later.
xxx
= “copy from” trunk entered in Step 1
Dial or type:
Trunk number [
nnn
]
Slot and port number *[
sspp
]
Logical ID number #[
nnn
]
Dial or type:
Trunk number [
nnn
]
Slot and port number [
sspp
]
Logical ID number #[
nnn
]