Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-176Optional Group Calling Features
3
Console/Display Instructions Additional Information PC
Save your entry.
Select
to return to Step 10 or
to return to Step 8.
You may change the overflow receiver by
repeating Steps 7 and 8.
Return to the System Programming menu.
Select
three times.
Group Calling Message-Waiting Indicator 3
Use this procedure to designate the extension to receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same message-
waiting receiver. The extension assigned as a message-waiting receiver does not
have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.
Summary: Group Calling Message-Waiting
Indicator 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting No message-waiting receiver assigned
Valid Entries Extension number
Inspect No
Copy Option No
Console Procedure
→More→ → →
Dial calling group ext. no.→ →Dial ext. no. for MWI
receiver
→ → →
PC Procedure → → → →Type calling group ext. no.→
→Type ext. no. for MWI receiver→ → →