Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-261Labeling
3
Console/Display Instructions Additional Information PC
Erase the current label (
AAAAAAA
) if assigned.
Enter a label for the line or trunk.
Use
to toggle between letters and
punctuation.
Dial or type the label.
Save your entry.
Select
.
NOTE:NOTE:NOTE:
, not .
Continue to label additional lines/trunks by
repeating Steps 4 through 8.
Return to the System Programming menu.
Select
twice.
Posted Message 3
Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called extension
does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, posted messages are not supported
across networked systems.
xxx
= number entered in Step 4
Press Drop.