Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-123Tie Trunks
4
Console/Display Instructions Additional Information PC
Enter the tie trunk number.
Save your entry.
Select
.
If you get the Trunk Busy message, wait for an
idle condition or exit system programming and try
again later.
Specify the trunk direction.
Continue to assign the direction to another trunk or go to Step 8.
Select
.
Return to Step 6. The next trunk is
displayed on Line 1.
Save your entry.
Select
.
Return to the System Programming menu.
Select
twice.
Dial or type:
Trunk number [
nnn
]
Slot and port number [
sspp
]
Logical ID number
#
[
nnn
]
xxxx
= trunk entered in Step 4
is used for tandem tie trunks in
R6.0 or later systems.
Select ,
, or
.