Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming with SPM
Page 2-65Upgrading the System
2
— When you upgrade from Release 1.0 to Release 4.2, you must first
program the features listed in Table 2–7
, then you must program the
features listed in Table 2–8
, then the features listed in Table 2–9,
then the features listed in Table 2–10
, then the features listed in
Table 2–11
, then the features listed in Table 2–12, then the features
listed in Table 2–13
.
■ Table 2–14. Lists the features added with Release 5.0 of the
communications system.
— When you upgrade from Release 4.2 to Release 5.0, you must
program the features listed in Table 2–14
.
— When you upgrade from Release 4.1 to Release 5.0, you must
program the features listed in Table 2–13
, then the features listed in
Table 2–14
.
— When you upgrade from Release 4.0 to Release 5.0, you must
program the features listed in Table 2–12
, then the features listed in
Table 2–13
, then the features listed in Table 2–14.
— When you upgrade from Release 3.1 to Release 5.0, you must
program the features listed in Table 2–11
, then the features listed in
Table 2–12
, then the features listed in Table 2–13, then the features
listed in Table 2–14
.
— When you upgrade from Release 3.0 to Release 5.0, you must
program the features listed in Table 2–10
, then the features listed in
Table 2–11
, then the features listed in Table 2–12, then the features
listed in Table 2–13
, then the features listed in Table 2–14.
— When you upgrade from Release 2.0 or 2.1 to Release 5.0, you
must program the features listed in Table 2–9
, then the features
listed in Table 2–10
, then the features listed in Table 2–11, then the
features listed in Table 2–12
, then the features listed in Table 2–13,
then the features listed in Table 2–14
.
— When you upgrade from Release 1.1 to Release 5.0, you must
program the features listed in Table 2–8
, then the features listed in
Table 2–9
, then the features listed in Table 2–10, then the features
listed in Table 2–11
, then the features listed in Table 2–12, then the
features listed in Table 2–13
, then the features listed in Table 2–14.
— When you upgrade from Release 1.0 to Release 5.0, you must first
program the features listed in Table 2–7
, then you must program the
features listed in Table 2–8
, then the features listed in Table 2–9,
then the features listed in Table 2–10
, then the features listed in
Table 2–11
, then the features listed in Table 2–12, then the features
listed in Table 2–13
, then the features listed in Table 2–14.