Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-262Extensions
4
Console Display/Instructions Additional Information PC
Assign or remove the line/trunk assignment.
Select
or
.
Return to the System Programming menu.
Select
.
Loudspeaker Paging 4
Use this procedure to identify the line/trunk jack reserved for connection of
loudspeaker paging equipment.
If you use equipment that rebroadcasts music or other copyrighted materials, you
may be required to obtain a copyright license from and pay license fees to a third
party (such as ASCAP or BMI). Magic on Hold requires no such license and can
be purchased from your Lucent Technologies dealer.
A maximum of three single-zone or multizone loudspeaker paging systems can be
connected to the system.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
to a line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
as a Remote Access line/trunk, and you cannot use its jack for Music on Hold or
maintenance alarm.
Summary: Loudspeaker Paging 4
Programmable by System Manager
Mode. All, but in Hybrid/PBX mode the line/trunk designated for
loudspeaker paging cannot be assigned to a line/trunk pool.
Idle Condition. Line/trunk idle
Planning Form. Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting. Not Applicable
Valid Entries. Line/trunk numbers
Inspect. Yes
Copy Option. No
Console Procedure.
→ →Dial line/trunk no.→ →
PC Procedure. → →Type line/trunk no.→ →