Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-121Tie Trunks
4
Console/Display Instructions Additional Information PC
Save your entry.
Select
.
Return to the System Programming menu.
Select
twice.
Tie Trunks 4
This section covers programming procedures for the following tie trunk options:
■ Direction
■ Tie Trunk Seizure Type
■ E&M Signal
■ Dial Mode
■ Tie Trunk Dial Tone
■ Tie Trunk Answer Supervision Time
■ Disconnect Time
See the
Equipment and Operations Reference
for additional information on tie
trunks.
Direction 4
Use this procedure to specify whether tie trunks operate in a one- or two-way
direction. For one-way tie trunks, you must also specify whether the direction is
out or in.
Summary: Direction 4
Programmable by System Manager
Mode All
Idle Condition Tie trunk idle
Planning Form Form 3c, Incoming Trunks: Tie
Factory Setting Two-way
Valid Entries Two-way, Outgoing, Incoming
Inspect No