Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-32Lines and Trunks
4
Console/Display Instructions Additional Information PC
Specify the type of trunks connected to the module.
Enter the port numbers that have ground-start or loop-start trunks connected.
400 and 408 ports:
n = 1 to 4; 800 ports: n = 1 to 8.
Continue to assign trunk types or go to Step 8.
Select
.
Return to Step 6. The next slot number
is displayed on Line 1.
Save your entry.
Select
.
Return to the System Programming menu.
Select
twice.
= 400, 408, 408-MLX, or 800
modules
xx
= slot number entered in Step 3
Select or
and go to Step 6.
Or, select or
and go to Step 9.
= option name selected in Step 5
xx = slot number entered in Step 3
NOTE:
If you get the Trunk Busy message,
wait for an idle condition or exit
system programming and try again
later.
Dial or type [
n
].