Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-332System Features
4
Host System Dial Codes for Behind Switch Mode4
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop button,
a signal is sent to the host service and the communications system features are
not accessed. Assigning dial codes to these features ensures that users can take
advantage of them through the host system.
NOTE:NOTE:NOTE:
This procedure applies to Behind Switch mode only.
Summary: Host System Dial Codes for Behind
Switch Mode 4
Programmable by System Manager
Mode Behind Switch
Idle Condition Not required
Planning Form Form 1, System Planning
Factory Setting No host dial codes are assigned
Valid Entries Host system dial code of up to 6 digits
Inspect No
Copy Option No
Console Procedure
→More→ →Select feature→
Drop→Dial host system dial code→ → →
PC Procedure → → →Select feature→
+
→
Type host system dial code→ → →