Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-120Optional Extension Features
3
Console/Display Instructions Additional Information PC
Specify the extension.
Assign or remove remote call forwarding from the extension entered in Step 4.
Select
or
.
You may assign or remove remote call
forwarding from additional extensions by
repeating Steps 4 and 5.
Return to the System Programming menu.
Select
twice.
Delayed Call Forwarding 3
Delayed Call Forwarding allows a user to answer or screen a call arriving at an
extension before the call is forwarded through Call Forwarding, Remote Call
Forwarding, or Follow Me. The forwarding delay is the number of rings before the
call is forwarded. This delay can range from 0 to 9 rings. If the forwarding delay is
set to 0, the call is forwarded immediately. Delayed Call Forwarding is available
only in Release 4.0 and later.
NOTE:NOTE:NOTE:
When Do Not Disturb is activated at an extension, it overrides Delayed Call
Forwarding and the call is forwarded immediately.
Use this procedure to assign or remove Delayed Call Forwarding from an
extension. If you are assigning Delayed Call Forwarding to a group of sequential
extensions, begin by programming the lowest extension number to take
advantage of the
screen key (see “Standard Procedures”).
If no DSS is attached:
SP: “Entering an Extension”
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = remote call forwarding is
assigned to extension
Off = remote call forwarding is not
assigned to extension