Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-300Optional Group Features
4
Optional Group Features 4
This section contains programming summaries for the following optional features:
■ Pickup Groups
■ Group Paging
■ Group Coverage Member Assignments
■ Group Coverage Delay Interval (Release 4.0 and earlier)
■ Group Calling Member Assignments
■ Group Calling Line/Trunk or Pool Assignments
See Chapter 3, “Common Administrative Procedures,” for detailed programming
information.
Pickup Groups 4
Use this procedure to assign or remove an extension from a call pickup group. A
pickup group consists of telephone users who can answer each other’s calls
either by pressing a button or by dialing a code.
NOTES:
1. A maximum of 30 pickup groups, with a maximum of 15 extensions per
group, is allowed.
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you must remove it
from its current group.
Summary: Pickup Groups 4
Programmable by. System Manager
Mode All
Idle Condition Not required
Planning Form Form 7a, Pickup Groups
Factory Setting Not applicable
Valid Entries Pickup group number, extension number
Inspect Yes
Copy Option No