MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-78Lines and Trunks
4
Summary: Copy Options for Lines/Trunks 4
Programmable by System Manager
Mode All (but note differences)
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Form 3c, Incoming Trunks: TIE
Form 3d, Incoming Trunks: DID
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option Not applicable
Console Procedure To copy individual lines/trunks:
→ → →Dial copy from trunk no.→
→Dial copy to trunk no.→ → → →
To copy blocks of lines/trunks:
→ → →Dial copy from trunk no.→
→Dial first copy to trunk no. in block→ →Dial
last copy to trunk no. in block
→ → → →
PC Procedure To copy individual lines/trunks:
→ → →Type copy to trunk no.→ →Type copy
from trunk no.
→ → → →
To copy blocks of lines/trunks:
→ → →Type copy from trunk no.→Type first copy
to trunk no. in block
→ → →Type last copy to trunk no.
in block
→ → → →
Procedure: Copy Options for Lines and Trunks 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.