Filter
Top Products
MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-259Extensions
4
Analog Multiline Telephones with Voice
Announce to Busy 4
Use this procedure to dedicate a voice or voice pair to provide the Voice
Announce to Busy feature on an analog multiline telephone.
The extension number associated with the first (odd-numbered) extension jack in
the pair is the telephone’s extension number. The extension number for the
second (even-numbered) extension jack is dedicated to the Voice Announce to
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data workstations.
NOTE:NOTE:NOTE:
This procedure does not apply to MLX telephones (Voice Announce to Busy
is automatically provided) and cannot be programmed for single-line
telephones.
Summary: Analog Multiline Telephones with
Voice Announce to Busy 4
Programmable by System Manager
Mode All
Idle Condition System idle
Planning Form Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC)
Analog Data Form 1a, Modem Data Workstation
Factory Setting Not applicable
Valid Entries Extension numbers
Inspect Yes
Copy Option Yes
Console Procedure
→ →Dial ext. no.→ →
→
PC Procedure → →Type ext. no.→ → →
NOTE:NOTE:NOTE:
“Data Features” on page –431
provides information about analog multiline
telephones in data workstations.