MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-76Lines and Trunks
4
Console/Display Instructions Additional Information PC
Assign or remove the line/trunk from the pool.
Select
or
.
You may continue to assign or remove additional
lines/trunks from the pool by repeating Steps 2
and 3.
Return to the System Programming menu.
Select
twice.
◆ Block Procedure
Console Display/Instructions Additional Information PC
Specify the block of 20 lines associated with the 20 line buttons
on the system programming console.
Select
Assign the appropriate lines/trunks to the pool.
Toggle the red LED on or off as required.
On = trunk is assigned to specified pool
Off = trunk is not assigned to specified pool
Return to the System Programming menu.
Select
twice.